R3400D

5.00 out of 5
4 Review(s) | Write a review

Riot MODEL 3400W High Output Monoblock, Class D Amplifier Dim:13.5"L 10.44"W 2.25"H

  • MODEL 3400W High Output MONOBLOCK Amplifier
    Up to 2550 W X 1 RMS @ 1 ohm
    Up to 1275 W X 1 RMS @ 2 ohm
    Up to 638 W X 1 RMS @ 4 ohm
    Up to 5100 W X 1 RMS Strapped Bridged Power @ 2 ohm
  • Monoblock, Class D, MOSFET Power Supply
  • Low Level Inputs, RCA Pre-amp Outputs
  • Variable Low Pass Crossover, Variable Bass Boost and Variable Subsonic Filter and Switchable Phase Control
  • Include Remote Subwoofer Control
  • Blue Backlit Illuminated BOSS Logo
  • Dimensions: 13.5" L x 10.44" W x 2.25" H
$233.99
This product is not currently available for purchase.
Out of Stock
California Prop 65 Warning

What is Proposition 65?

Proposition 65 is a California law that applies to companies selling products in California. Proposition 65 requires warnings if a product contains any listed chemical present above very low levels. Proposition 65’s warning standards are among the most stringent in the world. Proposition 65 is not a product safety law, but rather a "right-to-know" law. Businesses are required to provide warnings to comply with Proposition 65.

There are over 800 chemicals on the Proposition 65 list, which is administered by California's Office of Environmental Health Hazard Assessment (OEHHA), a part of the California Environmental Protection Agency. The list includes naturally occurring and man-made chemicals. Proposition 65 warnings can be seen for a wide variety of everyday consumer products, including electronic equipment, and warnings can be seen posted throughout California in a variety of establishments such as buildings, hotels, restaurants, coffee shops, and stores.

Why do you see the warning on our packaging and website?

The warning is part of our ongoing effort to comply with the California Safe Drinking Water and Toxic Enforcement Act of 1986 (known as "Proposition 65").

California Prop 65 Warning

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Fast, Free Shipping
U.S. Lower 48 States
60 Day Money Back
Hassle Free Returns
Standard Warranty 1 Year
Extended Warranty 2 Year
Tech Support
Live Chat or Call 805-751-4853
bossaudio.com/support

1 Ohm Stable

The lowest impedance accepted by this amplifier is 1 ohm. Amplifiers that are 1 ohm stable produce the most power possible from the amp. An amplifier capable of delivering power at a 1 ohm load is usually reserved for serious subwoofers that can handle the power. Please note this particular amp needs a healthy electrical system including a low gauge wire capable of delivering the necessary current.

Back Lit Illuminated Logo

The BOSS Logo is backlit in a cool blue on this Riot Series Amp.

Class D Amps

Class D is a high speed switching amplifier technology that is more efficient, generates less heat and draws less power than traditional Class A/B amps. We use Class D in our monoblock amplifiers to give you massive amounts of power in a relatively small footprint for clean, powerful, bass.

Phase Control

The phase control feature allows you to adjust the speakers phase to ensure all audio signals are playing together rather than against each other. When bass notes are noticeably absent, a quick and easy adjustment to the phase control could provide the perfect remedy.

Protection

If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.

Strapping Capability

Strapping capability means that two amplifiers can be linked together to create double the power at an impedance of 2 ohms. A benefit of strapping is less electrical current is required than if you ran [2] individual amps at 1 ohm and you only need 1 pair of preamp outputs and [1] RCA cable to connect.

Subsonic Filter

A subsonic filter is designed for use on subwoofers. Since not all subwoofers can reproduce the same low frequencies, the subsonic filter can be set for optimum bass response in order to keep the driver playing efficiently.

Subwoofer Level Control

The ability to boost or attenuate the sub level when an amp and subwoofer are connected to the subwoofer pre-amp output.

Switchable Input Sensitivity

Switchable Input Sensitivity gives you the freedom to connect the amp to any standard source unit and have peace of mind it will be within range to properly match the output of the source unit allowing you to use the volume controls on your source unit the way it was designed.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Variable Gain Control

Variable Gain Control lets you balance the amps output with the speakers or subs the amp is driving. To much gain will lead to distortion and to little will lead to clipping.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

// Attentive Tag